QwikLug - Terminal Repair Kit. Patented QwikLug easily attaches to damaged or corroded spade connectors, quickly and easily solving the problem of a compressor with pitted or severely corroded spade terminals. Tightens quickly from the front with a Phillips head screwdriver. Has a durable brass interior shielded by nylon exterior to prevent shorting. 12 AWG / 2 ft. Leads with nut
Most technicians have encountered the problem of a compressor with pitted or severely corroded spade terminals. The start-up current surge of repeated hot summer cycling eventually destroys the spade connector, sometimes leaving nothing but a corroded round post.
Mainstream has developed a patented product, QwikLug, to solve this problem. QwikLug easily attaches to damaged or corroded spade connectors. We have considered the difficulty in these field installations - the lack of space around these spade terminals - and have developed a solution. Simply push the QwikLug connector on and tighten it from the front with a Phillips screwdriver. QwikLug comes with color coded leads for connecting to existing wiring (Leads not included with QT2800). The outer connector housing is a nylon insulator so the connectors can touch without shorting.
QwikLug - Terminal Repair Kit. Patented QwikLug easily attaches to damaged or corroded spade connectors, quickly and easily solving the problem of a compressor with pitted or severely corroded spade terminals. Tightens quickly from the front with a Phillips head screwdriver. Has a durable brass interior shielded by nylon exterior to prevent shorting. 10 AWG / 2 ft. Leads with nut
Terminal Repair Kit that easily attaches to corroded spade connectors
Outer connector housing is a nylon insulator so the connectors can touch without shorting
Includes:
Comes with color coded leads for connecting to existing wiring (2’ leads have been pre-stripped at the wire connection end)
Optional set screws for tight installations
Instructions:
Disconnect power.
Clean damaged or corroded terminals.
Verify crimped connector is inserted into QwikLug body with spade pressed against the long flat side of the opening.
Crimped connector fits between terminal and screw.
Slide QwikLug over terminal and tighten screw with Phillips screwdriver.
Attach QwikLug lead to the unit (leads not included with QT2800).
Expedited Shipping
